Two-part scaffolding

Using scrap material (the studs from the closet removal), I attached the lower part of the homemade (what isn't around here?) platform to the wood stairs using screws. The stairs, being a future repair/removal item, is actually the weakest link. There were spots of softness during screw attachment. But having every contact point fastened with at least one long and strong screw, this is as steady as it gets. It's not going anywhere.



And to reach the top of the window (purpose of the scaffold), I measured my comfort zone standing on the platform. I needed a 24-inch rise.

It's important to leave enough separation from the wall because most working movements will have you pressing against the wall with your upper body and pushing outward with your lower. Appropriate diagonal bracing was used, and all contact points were again screwed down.